TB 11954 Posted June 8, 2016 Share Posted June 8, 2016 Is this the right spot to post my WIP? Greetings everyone. So after wanting to become a scout trooper for about seven years now, I'm finally going to do it. I'm not new to costuming, I've made costumes for other SW costume groups, but this is my first time doing a vacuum formed armor kit. So it will be a new experience working with that. My armor came in the mail today, I'm excited to start this. Some of the armor seems a little big on me though, I don't know if they're suppose to be that big, to fit over the under suit, or if I'm going to have to trim and/or reheat and form them. But the chest, back and biceps seem to be sized nicely... Anyway, excited to start this Quote Link to comment Share on other sites More sharing options...
Retrofire Posted June 8, 2016 Share Posted June 8, 2016 Yep this is the place. Having a build thread is the best way to get advice and ask questions so you're off to a great start! Quote Link to comment Share on other sites More sharing options...
TB 11954 Posted June 9, 2016 Author Share Posted June 9, 2016 Thank you. I took some photos of some of my armor (terribly) taped to my arm and my knees to determine if they are too large, need cutting/trimming, need to be reheated, etc. I don't know if you can tell by the photos so well or not, but the elbow and shoulder kinda hang off my arm on the sides. So any feedback on what you guys think will be much appreciated. This image you can see it hanging off my leg on the sides. I took another pic to show it from a front and side view perspective to see if the size it correct. Front of my arm Side of my arm Also when I took the tape off some of the pieces and I noticed yesterday as well, there seems to be a thin like plastic on top of the armor, and it's peeling a little. I don't know if this is important or not, or if I can just peel it off? Quote Link to comment Share on other sites More sharing options...
Retrofire Posted June 9, 2016 Share Posted June 9, 2016 Hi Jared! May I ask what maker you purchased your armor from? The pieces look to me to be a bit over sized on you. Here's a side pic of me in my armor made by SC: I'm about 5'8" tall and my armor overlaps a bit but wearing the soft armor (flight suit, cummerbund, vest, gloves) bulks you out some. My arm armor overlaps (around my arm) a bit but it's not excessive. I did a little trimming on the shoulder armor but nothing to the bicep or forearm armor. The same is true for the knees. It looks like they go too far up towards the thigh. The armor will definitely need to have the edges trimmed of the flash and sanded down to give it a clean look. You can do this with a pair of lexan scissors and some 220 grit sandpaper. Not sure what the thin plastic on top of the armor might be. Could be a protective covering of some sort that just needs to be peeled off but I'd rather one of the detachment Armourer's answer that question. Quote Link to comment Share on other sites More sharing options...
Chef Posted June 9, 2016 Share Posted June 9, 2016 Some plastics have a really thin clear covering over, rather like cling film. This is a protective covering and needs to be peeled off. If it's anything else.... Then I am at a loss. Quote Link to comment Share on other sites More sharing options...
TB 11954 Posted June 9, 2016 Author Share Posted June 9, 2016 Some plastics have a really thin clear covering over, rather like cling film. This is a protective covering and needs to be peeled off. If it's anything else.... Then I am at a loss. This is what it is. I'll peel it off, thank you. Peter I bought the armor off of ebay. And I'm 5'8" as well, to put it in perspective. I'm thinking for the shoulder if I trim it then reheat it with a heat gun I can get it to match my body better; but like you said the soft armor will bulk me up a bit so it's tough to know how much space the soft armor will fill up. The Bicep fits my arm nicely, so if the length is correct then that is all set. And as for the elbows I have no idea what to think for that, can't really trim it in and re heat, and I can't tell if it's the right length either. And the knees I might have them in the wrong spot, I have my kneecap in the crevasse right before it comes back... OR why it might look like it's goes up too far on the thighs may be due to the sweatpants I'm wearing. They are really baggy and so in pictures like the one above, it will seem like my knees are higher than they actually are. Quote Link to comment Share on other sites More sharing options...
The Scorpion Posted June 10, 2016 Share Posted June 10, 2016 From what I gather eBay is a bad place to get armor. The knees do look way to big. Quote Link to comment Share on other sites More sharing options...
TB 11954 Posted June 10, 2016 Author Share Posted June 10, 2016 Ok so I trimmed off the "threads" and reheated and reshaped the knees, and I put on better pants. Do they still look too small? I think they look much better now. Quote Link to comment Share on other sites More sharing options...
TB 11954 Posted June 13, 2016 Author Share Posted June 13, 2016 Ok so I bought some fabric to start my cummerbund. Quote Link to comment Share on other sites More sharing options...
Ravageous Posted June 14, 2016 Share Posted June 14, 2016 Looks great! Looking forward to see more pics! Quote Link to comment Share on other sites More sharing options...
TB 11954 Posted June 17, 2016 Author Share Posted June 17, 2016 So while I'm getting things in order, and starting my cummerbund, I figured I'd get my flight suit now. How do these look? FLIGHT SUIT These were probably the best looking ones I could find anywhere that was around that price. Quote Link to comment Share on other sites More sharing options...
TB 11954 Posted June 20, 2016 Author Share Posted June 20, 2016 Ok so I got most of my cummerbund finished, just got to put velcro and the pouches on. Quote Link to comment Share on other sites More sharing options...
M.J Posted June 21, 2016 Share Posted June 21, 2016 Jared hi, Is there anyone in New York that could give you a hand, I have a fair idea which kit you may have and you will need to do some cleaning up, or even replacing. Could you also show us the detonator that clips on the belt, that will confirm which one it is. You may need to redo your cummberbund, there are no seams running up and down the cod piece and along the bottom of the bun. Though you did a good job for your first effort. Here is a photo of my third cummberbun to give you an idea. Quote Link to comment Share on other sites More sharing options...
TB 11954 Posted June 21, 2016 Author Share Posted June 21, 2016 I was going to redo the cod piece anyway so that's good. I like this much better. Why does it matter if there's a seam at the bottom of the cummerbund? The whole thing is going to be covered by a belt anyway. And here is my detonator. It's not trimmed yet. Quote Link to comment Share on other sites More sharing options...
M.J Posted June 22, 2016 Share Posted June 22, 2016 Thanks for the photo..its not the kit I thought, which is a good thing for you. Yes it might be covered and it might not but its in the movie and its worth while to change it just in case here is a photo a Scout from the movie, you can see the bottom of his cummberbun. Also on this forum there are a few photos of the back of the Scout on a bike clearly showing no Seam. Quote Link to comment Share on other sites More sharing options...
TB 11954 Posted June 22, 2016 Author Share Posted June 22, 2016 That is good news. Well I will leave it how it is for now, I think I made it big enough that it will always stay covered. And upon time to take pictures of the finished costume, if it's still an issue I'll gladly remake it, as I know more about making them now than I did when I started. Quote Link to comment Share on other sites More sharing options...
TB 11954 Posted July 2, 2016 Author Share Posted July 2, 2016 So my Red Kap coveralls came finally! And well um, they're a little... tight. Is this normal? Are they suppose to be this tight? And it's also choking me (not to the point that I can't breath, but just not comfotable) if I button it up all the way... Also how do I attach the pouches to my cummerbund? Quote Link to comment Share on other sites More sharing options...
Griffin-X Posted July 3, 2016 Share Posted July 3, 2016 You might need a larger sized suit. It sounds like the suit is too small. It should not be choking you. Got a pic? Quote Link to comment Share on other sites More sharing options...
TB 11954 Posted July 3, 2016 Author Share Posted July 3, 2016 Here is a full body pic of my coveralls. Quote Link to comment Share on other sites More sharing options...
Griffin-X Posted July 3, 2016 Share Posted July 3, 2016 The fit looks good. If you are planning to do the mods yourself, you can add a snap to make the top closure more fitting. Or, if you take them in for alterations, have the snap added. Since you'll need to have the collar altered to mandarin style, that's your best bet. Quote Link to comment Share on other sites More sharing options...
TB 11954 Posted July 3, 2016 Author Share Posted July 3, 2016 Excellent thank you. I was thinking that might be a possibility for me to do... But what about the tightness, it's tight going right up into my groin; are the Red Kap suits just made like that? Quote Link to comment Share on other sites More sharing options...
Griffin-X Posted July 3, 2016 Share Posted July 3, 2016 Yeah, they can be a bit tight there too. You can always let it out a little in the crotch area since you'll need to add the suede riding patch. Quote Link to comment Share on other sites More sharing options...
TB 11954 Posted July 3, 2016 Author Share Posted July 3, 2016 That's also what I was thinking, but I didn't know if it would work. Thank you for reassuring me though. It's weird though, when I put the cummerbund on it doesn't really bother me as much as it does without it. Weird. And speaking of cummerbunds, I've seen pictures of the pouches with a flap that's attached to the cummerbund, is this how it's put on, or that just a preference thing? Quote Link to comment Share on other sites More sharing options...
Griffin-X Posted July 3, 2016 Share Posted July 3, 2016 No problem and it can be done. I did it to mine. As yes, that's a bind preference. You could attach the pouches to the bund in whatever fashion suits you. Quote Link to comment Share on other sites More sharing options...
TB 11954 Posted July 4, 2016 Author Share Posted July 4, 2016 Very good, thanks for clearing that up. I'll add the pouches on tomorrow, and probably will post pics. I was also poking around the forums and saw a few things that I'm not confused about =P Am I suppose to use rivets for the belt? Or is that also preference? I mean I'm going to have to get a riveter anyway for the boots (and possibly helmet IDK) And I also saw something that rivets are used for the knees... Don't know if that's also a preference/for lancer, or if it's mandatory, and I don't even know where they would go... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.