Low-Endor Posted March 15, 2016 Share Posted March 15, 2016 Link to comment Share on other sites More sharing options...
Low-Endor Posted March 15, 2016 Author Share Posted March 15, 2016 photos of all small armor bits shows chrome rivets on knee armor. This is an older photo just to show all armor (which is from Studio Creations). knee armor rivets have been painted white (see photo up top) Link to comment Share on other sites More sharing options...
BikerScout007 Posted March 15, 2016 Share Posted March 15, 2016 Thanks for your application! We will review and get back to you Oh and throw in a pic of your blaster too if you don't mind Link to comment Share on other sites More sharing options...
Low-Endor Posted March 15, 2016 Author Share Posted March 15, 2016 incoming 1 Link to comment Share on other sites More sharing options...
Low-Endor Posted March 15, 2016 Author Share Posted March 15, 2016 Link to comment Share on other sites More sharing options...
BikerScout007 Posted March 21, 2016 Share Posted March 21, 2016 Hey buddy, here are your review notes: 1) Your shoulder joins need to be tightened. You can see the gap underneath the joins. I'd bring the two plastic pieces right up against each other (or even overlapping a bit) and then put the shoulder bridges overtop 2) Pouches need to be even. Just line them up with the last rib on each side of your bund 3) Bund and vest closures need to be right-to-left. Your bund at least is left-to-right, so just flip it over. 4) Your dropboxes should be brought up about an inch and evened out. 5) Turn your bicep armor forward on your next round of pics and make sure the two discs on the greeblie are facing forward on each arm. Nice work, scout, just a few things! Link to comment Share on other sites More sharing options...
Low-Endor Posted March 21, 2016 Author Share Posted March 21, 2016 Roger that. New photos with changes coming tomorrow night. Do I just need to show changes or full round of photos again? Sent from my iPad using Tapatalk Link to comment Share on other sites More sharing options...
BikerScout007 Posted March 21, 2016 Share Posted March 21, 2016 Just the changes. But in the case of your changes it looks like you will need to suit up, as we need to check pouch placement, drop box height, bicep armor placement and the direction of your vest and bund closures. And for that you need to be wearing the gear. Good luck! Link to comment Share on other sites More sharing options...
Low-Endor Posted March 21, 2016 Author Share Posted March 21, 2016 Understood. Thanks Sent from my iPad using Tapatalk 1 Link to comment Share on other sites More sharing options...
Low-Endor Posted March 22, 2016 Author Share Posted March 22, 2016 Pictures incoming Sent from my iPad using Tapatalk Link to comment Share on other sites More sharing options...
Low-Endor Posted March 23, 2016 Author Share Posted March 23, 2016 Link to comment Share on other sites More sharing options...
BikerScout007 Posted March 23, 2016 Share Posted March 23, 2016 I already PMed you about the TD clips.... the rest of the review staff will be reviewing your new pics. Thanks for the quick turnaround! Link to comment Share on other sites More sharing options...
BikerScout007 Posted March 28, 2016 Share Posted March 28, 2016 Okay buddy, here you go: 1) As I said in my PM, you need the TD clips. Sorry we missed that the first time. 2) Your vest sleeves are flaring a bit. Either loosen your shoulder bell straps or run a new seam line. I did the latter with my own vest. 3) Pull your belt up about an inch so it meets the bottom of your pouches. Also, it looks like your vest has a left over right closure. We're not going to ding you for that, because we haven't specifically listed it, but it's something you may want to change in the future. Switching the side that velcros should do the trick. Looking good, scout! Link to comment Share on other sites More sharing options...
Low-Endor Posted March 28, 2016 Author Share Posted March 28, 2016 Thanks guys. I should have clips this week and will then take more photos. Most likely Wednesday or Thursday Sent from my iPad using Tapatalk 1 Link to comment Share on other sites More sharing options...
Low-Endor Posted April 5, 2016 Author Share Posted April 5, 2016 just keeping you all in the loop. I need to order a new part so my new photos will be posted once that arrives and I attach the clips. 1 Link to comment Share on other sites More sharing options...
Chex Posted April 5, 2016 Share Posted April 5, 2016 Looking forward to it! 1 Link to comment Share on other sites More sharing options...
Low-Endor Posted April 17, 2016 Author Share Posted April 17, 2016 sorry guys. my TD tube still has not arrived so no update. But just wanted to update you so you were in the loop Should be here this week and then I'll post updated shots with the new clips and the tightened up sleeves. 1 Link to comment Share on other sites More sharing options...
BikerScout007 Posted April 18, 2016 Share Posted April 18, 2016 Cool, buddy! No rush on this stuff. Just make sure you look the best you possibly can and the rest will sort itself out. Link to comment Share on other sites More sharing options...
Low-Endor Posted April 20, 2016 Author Share Posted April 20, 2016 Link to comment Share on other sites More sharing options...
BikerScout007 Posted April 25, 2016 Share Posted April 25, 2016 Okay the cast of characters have weighed in. Your corrections look great.... however another issue has popped up and I apologize that we missed this before You can see the stitching on your pouch flaps for the velcro closures. That's a definite no-no, as our Lancer CRL states: "No external stitching around the flaps or velcro attachment should be seen." Let me know if you need any pointers on that. Also, you should take a file or some sandpaper to those corners of your shoulder bells and round them out. You don't want the sharp edges. Link to comment Share on other sites More sharing options...
Low-Endor Posted April 25, 2016 Author Share Posted April 25, 2016 Ok, back at it. I'll repost when I'm done. Sent from my iPad using Tapatalk 1 Link to comment Share on other sites More sharing options...
BikerScout007 Posted April 25, 2016 Share Posted April 25, 2016 Ok, back at it. I'll repost when I'm done. Sent from my iPad using Tapatalk Excellent, my man! You are almost to the finish line Link to comment Share on other sites More sharing options...
Low-Endor Posted April 26, 2016 Author Share Posted April 26, 2016 Link to comment Share on other sites More sharing options...
Low-Endor Posted April 26, 2016 Author Share Posted April 26, 2016 Link to comment Share on other sites More sharing options...
Low-Endor Posted April 29, 2016 Author Share Posted April 29, 2016 Bump for all my Lancers out there Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts