khazara Posted March 17, 2015 Share Posted March 17, 2015 So I just received the resin scout trooper blaster replica I ordered. The heft is nice - it weighs about 1lb 3 oz - and the size seems fine in my hand. But I think it looks too big when put in the SC boot holster. It doesn't appear to be a mold based on the Kenner toy. It measures about 8 3/4" from end of the scope to the tip of the barrel. The scope length is 7 1/2". http://imgur.com/a/NHJzd#4 What do you think? Quote Link to comment Share on other sites More sharing options...
Darth Voorhees Posted March 17, 2015 Share Posted March 17, 2015 It should be about 7 3/4"-8" long (from the tip of the nozzle to the end of the ribbed section attached to the rear). Scope should be about 7" if i recall correctly. I can measure mine tomorrow if you'd like, but i remember the measurements being around there. So it may be a little on the large side 1 Quote Link to comment Share on other sites More sharing options...
Chex Posted March 17, 2015 Share Posted March 17, 2015 I'd make sure you're either reinforcing your boot, or putting some velcro on your leg and inside of the boot to help support the weight of the blaster. Otherwise your boot will sag like it was cool. Had that problem with the heavy KS blasters. I troop now with a hyperfirm and it's like a dream. 2 Quote Link to comment Share on other sites More sharing options...
Darth Voorhees Posted March 17, 2015 Share Posted March 17, 2015 Psshhhh you should have my blaster in that boot Chex! Seriously though, Chex is right..i have a bit of velcro sewn onto my jumpsuit and on the inside of the boot shaft to keep it from sagging like a ghetto kids pants lol. Even with a light blaster, its still a good idea. 3 Quote Link to comment Share on other sites More sharing options...
Chex Posted March 17, 2015 Share Posted March 17, 2015 LOL if I didn't have what I have now, I'd have a DVH blaster! Quote Link to comment Share on other sites More sharing options...
khazara Posted March 18, 2015 Author Share Posted March 18, 2015 Seriously though, Chex is right..i have a bit of velcro sewn onto my jumpsuit and on the inside of the boot shaft to keep it from sagging like a ghetto kids pants lol. Even with a light blaster, its still a good idea. That is a fantastic idea. I will likely do that! Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
NegativeEleven Posted March 26, 2015 Share Posted March 26, 2015 Yeah, that's not based on the Kenner. The Kenner wouldn't have that scope ring, and has a texture on the handgrip. If it's a modded recast, like the ones I make, they did a lot of work, but it looks smaller than mine. That scope is definitely not the Kenner. Quote Link to comment Share on other sites More sharing options...
trett4361 Posted May 12, 2015 Share Posted May 12, 2015 Chek where did you get your hyper firm I can't find one Quote Link to comment Share on other sites More sharing options...
NegativeEleven Posted June 6, 2015 Share Posted June 6, 2015 If your boot is a thin weak vinyl, try a layer of something thicker inside, sewn into the top/bottom where the vinyl is folded over and you can stitch it in a couple of spots under the holster. You could use leather or, as I did with my old boots, eisenglass (clear thick vinyl they use for soft top boat windows). Then add the velcro to that and it shouldn't go anywhere, but you might have a little trouble moving. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.