Sith Lord Posted March 1, 2015 Posted March 1, 2015 Hi. I'm Anders. I'm from Trondheim, Norway. I've started my first build. I have bought the SC -armor and helmet. Here I'm glueing the helmet. Sith Lord Quote
Sith Lord Posted March 1, 2015 Author Posted March 1, 2015 I attached the sticky velcro and I used my sewing machine to sew the hook velcro on the elastic webbing. Sith Lord 2 Quote
Sith Lord Posted March 1, 2015 Author Posted March 1, 2015 The SC Tank Topper has a predrilled hole for the rivet. But it's not in the center. Sould I use this, ore sould I drill a new hole? Sith Lord Quote
Southscout Posted March 1, 2015 Posted March 1, 2015 It should be where the mark is, not the hole. Also, try to get some distance between the back of the tank and the plate, like 1cm or so. Skickat från min LG-D802 via Tapatalk 1 Quote
uscstaylor Posted March 2, 2015 Posted March 2, 2015 Sith go here and please follow Pandas thread, it was a great help to me and others. Look at the pics and read the instructions. You are doing a good job but you don't want to rush it...Keep strong! http://forum.bikerscout.net/index.php?showtopic=9781 2 Quote
Chex Posted March 2, 2015 Posted March 2, 2015 That's odd..I know when I built my kit that hole was in the center. Def cover that hole and drill out the center hole and use that. 2 Quote
Southscout Posted March 2, 2015 Posted March 2, 2015 And if you don't have a rivet that's long enough, just pop one, cut of the end, put some glue in the hole, add a washer and drop the short rivet head in the hole. Skickat från min LG-D802 via Tapatalk Quote
Sith Lord Posted March 5, 2015 Author Posted March 5, 2015 Got my gloves from Wampawear in the mail today. Realy nice. They fit "liiike a glove". Love them. Sith Lord Quote
Sith Lord Posted March 11, 2015 Author Posted March 11, 2015 At last I got my E6000 in the mail, so I finally could glue the tank topper. Sith Lord Quote
Sith Lord Posted March 11, 2015 Author Posted March 11, 2015 I used some leftover plastic from where the helmet visor sould be, to make a bracket. This is to fasten the rivet that goes trough the tank topper. Sith Lord Quote
Sith Lord Posted March 11, 2015 Author Posted March 11, 2015 Using a cross line laser to get the decals straight. Sith Lord 1 Quote
Sith Lord Posted March 11, 2015 Author Posted March 11, 2015 Finished with the back Sith Lord 1 Quote
Southscout Posted March 12, 2015 Posted March 12, 2015 That's cheating! (Which I only write since I didn't think of it myself...) 1 Quote
Teiwaz Posted March 12, 2015 Posted March 12, 2015 I had the same issue with my tank topper. Its a bit of a mystery why that off centre hole is there. I filled it in and painted it over. Quote
stasz Posted March 12, 2015 Posted March 12, 2015 On 3/12/2015 at 1:26 PM, Teiwaz said: I had the same issue with my tank topper. Its a bit of a mystery why that off centre hole is there. I filled it in and painted it over. What did you use to fill it in? I've got to do that too... Quote
Teiwaz Posted March 12, 2015 Posted March 12, 2015 Hot glue, just because it was easy to work with. Shaved it back and painted it black by spraying onto a cotton bud. More experienced builders will probably have a better idea but it worked for me. Quote
Sith Lord Posted March 12, 2015 Author Posted March 12, 2015 Preparing for spraypainting the snout. Sith Lord Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.