theisaac Posted February 3, 2015 Posted February 3, 2015 Hi all, I'm starting a TB build and want to share my experience and ask a ton of questions along the way. I've built a TK and a TI before so I'm really looking forward to a new challenge. So far, I've got some gloves from WampaWear and my SC armor arrived today. I've ordered both a KS and CB helmet and a Bund/pouches from Marcel. I'll probably go with a red kap jumpsuit but I haven't settled on that quite yet. I'm really open to suggestions on the suit. I'll build for Lancer but settle for basic approval. more to come.... 2
SulacoBoy Posted February 3, 2015 Posted February 3, 2015 Woot! Can't wait to see more progress pics.
theisaac Posted February 3, 2015 Author Posted February 3, 2015 I'll be doing the biceps and forearms tonight. Does anyone have an opinion about adding extra ABS behind the cuts in the armor to help with any stress the elastic can place on the armor? I'd like to avoid any tearing after a few years of trooping. Thanks.
Thxboy Posted February 3, 2015 Posted February 3, 2015 I'll be doing the biceps and forearms tonight. Does anyone have an opinion about adding extra ABS behind the cuts in the armor to help with any stress the elastic can place on the armor? I'd like to avoid any tearing after a few years of trooping. Thanks. I think the elastic would possibly rip or tear sooner than the armor would break. I followed Pandatrooper's tutorial closely and I think he has reinforcement for rivets but not elastic and velcro. To much give for those things. I would love to see what you come up with though if it concerns you. It's your armor and you can do what you want! 1
Dart Posted February 4, 2015 Posted February 4, 2015 Does anyone have an opinion about adding extra ABS behind the cuts in the armor to help with any stress the elastic can place on the armor? I'd like to avoid any tearing after a few years of trooping. If it honestly worries you, go for the reinforcement. But if you just round off the edges where the strap sits, that'll do just fine.
theisaac Posted February 4, 2015 Author Posted February 4, 2015 Thanks for the feedback on the added plastic. If you guys haven't had tearing, I won't worry about it. Washed all of the armor to get any release agents off of the inside where I would be sticking adhesive velcro. I never thought this was a big deal until I made a Mando kit using some Sith Jedi shins and couldn't keep the velcro from peeling off during a troop. Cut the velcro stips and used E6000 to add the tank topper and T-Bits to the biceps. ] Once the E6000 dries, I'll feel off the parts that leaked out. 1
theisaac Posted February 4, 2015 Author Posted February 4, 2015 Used PandaTrooper's sick shoulder rounding trick to make the bells look better. (I've used his tutorials for Sandtroope weathering... building an AM TK kit... and now here)
theisaac Posted February 5, 2015 Author Posted February 5, 2015 I came home planning to sew elastic and velcro but the SC kit only comes with enough elastic to fit in the knees. The slots that were pre-cut on the biceps and forearms were too small for the longer 1.5 inch velcro. I'm going to rivet the tank on tonight after reviewing some different ways people have attached it. It looks like the rivet will fit on the bottom just fine, but the top looks like it needs something added to give it more room to seat.
Griffin-X Posted February 5, 2015 Posted February 5, 2015 Should I have this posted in the armor section instead? I have moved the thread and you're all set. Looking good!
theisaac Posted February 6, 2015 Author Posted February 6, 2015 Just kinda stumbling my way through this one. Got the tank on and the belt is clamped and curing now. [/url]
khazara Posted February 6, 2015 Posted February 6, 2015 Did you use the SC-provided tank striping or something different? Sent from my iPad using Tapatalk
theisaac Posted February 6, 2015 Author Posted February 6, 2015 I used the stickers they had in the kit.
theisaac Posted February 7, 2015 Author Posted February 7, 2015 This came in the mail today from Marcel (Thanks brother!) Do I secure the pouches to the armor or the bund itself? 3
bdgr Posted February 7, 2015 Posted February 7, 2015 Do I secure the pouches to the armor or the bund itself? Either will work. Your choice
theisaac Posted February 9, 2015 Author Posted February 9, 2015 So while test fitting the chest and back armor, it's not wrapping around my chest very well. Has anyone tried to fit SC armor on a fat guy before? I dont think heating the armor will open it up on the sides without causing a ripple. Suggestions? (Besides go on a diet Isaac).
Darth Voorhees Posted February 9, 2015 Posted February 9, 2015 Your blaster is in the mail bud! You may be able to heat up the ends just a touch and get it to fit. Far enough to the end so you wont cause that ripple. How off is it? I have a 44" chest and have MC armor which is smaller than SC's and i didnt need to do anything to it. It does sit with a larger gap between the chest and back plates, but other than that it fits well.
theisaac Posted February 9, 2015 Author Posted February 9, 2015 My chest is 52 inches at the rib cage.
theisaac Posted February 14, 2015 Author Posted February 14, 2015 Never underestimate what a heat gun and some patience can do for some plastic. Problem solved. 3
theisaac Posted February 15, 2015 Author Posted February 15, 2015 What's the best "troop-friendly" way to attach the belt in the back? I've seen those black paratrooping clips used. I've also seen velcro. Suggestions?
theisaac Posted February 15, 2015 Author Posted February 15, 2015 Got my gloves and never posted pictures.
Chex Posted February 23, 2015 Posted February 23, 2015 What's the best "troop-friendly" way to attach the belt in the back? I've seen those black paratrooping clips used. I've also seen velcro. Suggestions? If you're not worried about going for Lancer, then you can use a parachute clip back there. I still use one from when I was approved back in the day. But when I redo my belt, I'll upgrade that to the most current Lancer standard. Slowly I'll update all my gear to the most current lancer standard. You're doing a good job on the armor. Keep it up!
theisaac Posted February 23, 2015 Author Posted February 23, 2015 Chex, Thanks for the info. I went ahead and just copied what I saw in the lancer threads and used velcro in the back of the belt. I'm waiting until my RedKap suit arrives before trimming the drop box straps and attaching those. I'm not planning on requesting Lancer, but I'm building to Lancer spec if that makes sense. I went for Centurion on FISD and it was a really bad experience. I'll post up some progress pictures once that jumpsuit arrives. Jim, Thanks brother! 1
Darth Voorhees Posted February 23, 2015 Posted February 23, 2015 Gloves look great! Glad you worked out the armor issue..i had a feeling a little patience with a heat gun should remedy your problem. As for the belt...the "correct" way is velcro. I actually like it better than the parachute clip because it gives you a little room for adjustment if you lose or gain a couple pounds from a garrison pizza party lol. 2
theisaac Posted February 23, 2015 Author Posted February 23, 2015 The flightsuit arrives tomorrow so I'll post up pics dressed up for adjustment review and tips. Only thing left is the boots I'm trying to pull off myself. If that fails, I'll send Marcel more money. The snout is coming from Lou I have a vest on commission from a local seamstress and the thinner elastic for the lancer knee toppers. Light at the end of the tunnel...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now