Guest JWFortin Posted October 13, 2014 Share Posted October 13, 2014 So I got the visor cutout and I used the Dremel to smooth it all down.  I was hoping to get input and opinions on it before going any further. Also, I was wondering what all of you here would suggest. When it comes to the snout.  How far up the ridge should I paint black before I glue on the grebblie? Thanks for any and all input. Quote Link to comment Share on other sites More sharing options...
spookymufu Posted October 13, 2014 Share Posted October 13, 2014 the paint should go about half way on the flat area Quote Link to comment Share on other sites More sharing options...
01Hawk Posted October 13, 2014 Share Posted October 13, 2014 I think it is opened up enough but may want to run some sand paper around it to smooth out the lines. Put the visor in or a piece of black paper to get a feel for where it looks rough etc. The black paint will come halfway up the opening. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.