Fistful of Energon Posted April 2, 2014 Share Posted April 2, 2014 So i finally got my SC armor. I want to start on it ASAP but I would like to have all my materials beforehand. Outside of what already comes with the kit, and the dremel I own what else do I need? Ill be going to the hardware store this weekend and would like to be prepared. I see a lot of people prefer E6000, is this a gel like glue? or more like a liquid like super glue? Hot glue gun? riveter, what size rivets? As always, any and all help is appreciated! Quote Link to comment Share on other sites More sharing options...
Fistful of Energon Posted April 2, 2014 Author Share Posted April 2, 2014 not sure how this thread posted twice. can a mod please delete one? Quote Link to comment Share on other sites More sharing options...
Soundwave Posted April 2, 2014 Share Posted April 2, 2014 I used 3mm rivets. also, you may want to pick up some washers. For added support, use washers on both sides of what you are riveting in hidden areas. I also used superglue in some parts, and ABS apoxy for some... Sandpaper - both rough and fine grain. LOTS of velcro - White and black from wal-mart. I bought at least 10 boxes total... 5 white, 5 black industrial strength. I also suggest meeting up with someone local and taking a good, long look at their armor. Brainstorm and talk out what worked for them, and what didn't. It's a learning process for everyone. So, don't be afraid to go your own route... Just make sure you know what you are doing, and what has worked for others in case of an emergency. Quote Link to comment Share on other sites More sharing options...
Griffin-X Posted April 2, 2014 Share Posted April 2, 2014 Done. You'll definitely need some tools and supplies. The SC kit comes with most of the Velcro required and I think he's even including cotton webbing. If not, you'll need to get that for the drop boxes. E6000 is an adhesive glue commonly used on armor builds. It takes time to cure (like 24 hours for a good bond), and can be separated later on without a mess. IT IS NOT SUPER GLUE. Quote Link to comment Share on other sites More sharing options...
jyjellyfish77 Posted April 2, 2014 Share Posted April 2, 2014 Yeah most of the supplies come with it. Only things you need have been mentioned. Rivets, washers, rivet gun, and some e6000. Clamps to hold down some stuff. 1 Quote Link to comment Share on other sites More sharing options...
mr_hair Posted April 2, 2014 Share Posted April 2, 2014 Not absolutely essential, but a palm sander is pretty handy Quote Link to comment Share on other sites More sharing options...
EnigmaEngine Posted April 2, 2014 Share Posted April 2, 2014 Pretty much what's been said. For rivets you'll want 3mm by 3mm (1/8") aluminum, and matching washers; I found both at Lowe's, though I got my riveter at Home Depot. 1/8" diameter by 1/4" long was useful for one or two spots where I had to go through multiple layers of fabric and plastic. You'll need a matching drill bit...and drill, obviously. E6000 worked great for me..can be found at craft stores (Hobby Lobby, Michael's, Hancock Fabrics). Sturdy scissors/shears to trim edges and round corners. A few clamps to hold things in place, both while adhesive sets, and while drilling or testing fit before riveting things in. I ended up using some more elastic, velcro, and fabric than what was provided, but some of it was because I'm a big guy. 6'3" and 230 lbs. So I needed more than what was provided in places. I also used some extra to fix issues I specifically had, such as fixing my belt sagging down by adding patches to hold it to the front and back of my bund. You'll need something to make the cloth loops that bridge the gap over the shoulders between chest and back...I got someone who sews to make mine out of white canvas, and glued the ends in place with E6000. I managed to make mine without a dremel/rotary tool, but there were definitely times I wished I had one. Picked it up since. 1 Quote Link to comment Share on other sites More sharing options...
ThatThingOnTheFloor Posted April 2, 2014 Share Posted April 2, 2014 I recommend a dremel and a palm sander. SC Armor comes with everything, at least in my case I had enough webbing left over to do my shoulder bridge covers. E6000 everywhere. Seriously, once it starts flowing out of the tube, it doesn't stop. Be your arse careful. Quote Link to comment Share on other sites More sharing options...
Fistful of Energon Posted April 3, 2014 Author Share Posted April 3, 2014 I used 3mm rivets. also, you may want to pick up some washers. For added support, use washers on both sides of what you are riveting in hidden areas. I also suggest meeting up with someone local and taking a good, long look at their armor. Brainstorm and talk out what worked for them, and what didn't. It's a learning process for everyone. So, don't be afraid to go your own route... Just make sure you know what you are doing, and what has worked for others in case of an emergency. That's my biggest problem, I'm the first scout in my area. I have a guy helping me but it's a new kind of build for him. Quote Link to comment Share on other sites More sharing options...
Chex Posted April 3, 2014 Share Posted April 3, 2014 Check out PandaTroopers build thread. You don't have to follow it to a tee, but it should give you some really good insight. 2 Quote Link to comment Share on other sites More sharing options...
Soundwave Posted April 3, 2014 Share Posted April 3, 2014 Yes, Listen to Chex you should. PandaTrooper inspired quite a bit on my build... But I'm nowhere even close to being on his skill level. I'm lucky if I get a snap-together model together, in all honesty... But anything any of us can help with, You don't have to beg. Just throw a note up and ask. Or, send someone a PM. Feel free to throw me a few, if you want. I am by no means an expert, But I can and will try to help you any way I can. I mean... Seeing as how we're both tied to Cybertron. Might'as well stick together. Right? 1 Quote Link to comment Share on other sites More sharing options...
Fistful of Energon Posted April 4, 2014 Author Share Posted April 4, 2014 Thanks for all the suggestions guys! Got my grocery list Quote Link to comment Share on other sites More sharing options...
Fistful of Energon Posted April 17, 2014 Author Share Posted April 17, 2014 I would like some abs plastic to attempt panda troopers method of attaching the tank to the backplate. Would a hardware store carry something like that? I just don't have scrap armor lying around like some of you lol Quote Link to comment Share on other sites More sharing options...
Soundwave Posted April 17, 2014 Share Posted April 17, 2014 I'll send you a PM... Quote Link to comment Share on other sites More sharing options...
01Hawk Posted April 17, 2014 Share Posted April 17, 2014 I ordered strips of it from trooperbay and they where shipped safely and promptly. I was in a Hobby Town USA store the other day and they had sheets of Styrene for sale for like $7 in various thicknesses. I don't know if there would be an issue with that being up against ABS plastic though but have seen it used in other costumes. Quote Link to comment Share on other sites More sharing options...
Bobik96 Posted April 18, 2014 Share Posted April 18, 2014 The kit has all the materials you need. But if you want to meet Lancer specs you need to buy different elastic straps. There is not near enough 1 inch and no 1 3/8. 1 Quote Link to comment Share on other sites More sharing options...
Bobik96 Posted April 18, 2014 Share Posted April 18, 2014 Well I may have been wrong. I thought that I had 1.5 inch elastic in my kit but when compared to my 1.5 in Velcro the Velcro is wider. My elastic is actually 1 5/16 inches wide. Close enough for me. I'm using it. Quote Link to comment Share on other sites More sharing options...
Fistful of Energon Posted April 26, 2014 Author Share Posted April 26, 2014 thanks again everyone for the help. I am moving right along and have my final piece, the soft parts, on order from CB. my only issue is the sewing parts, i can use a sewing machine, i sewed banners all day at my last job, i can also hand sew pretty good but its a huge pain. I've considered getting a sewing machine from Amazon ($80 i believe) but if i can avoid the extra cost i will. I've asked around and no one can help me with one. so what i want to know is, can i get away with gluing instead of sewing?? how many of you have done this? Quote Link to comment Share on other sites More sharing options...
Bobik96 Posted April 26, 2014 Share Posted April 26, 2014 I ordered strips of it from trooperbay and they where shipped safely and promptly. I was in a Hobby Town USA store the other day and they had sheets of Styrene for sale for like $7 in various thicknesses. I don't know if there would be an issue with that being up against ABS plastic though but have seen it used in other costumes. I found the polystyrene to be much cheaper and more available in my area. E6000 held it perfectly to my ABS. I also know from previous experience that a .20 cent electrical outlet box cut into strips will also stick to abs with e6000. Quote Link to comment Share on other sites More sharing options...
Fistful of Energon Posted April 28, 2014 Author Share Posted April 28, 2014 polystyrene is more brittle than ABS, I want to avoid using it if possible. Jeff from SC sent me some scrap pieces for free, nice guy. Also I broke down and got a sewing machine from someone on craigslist today, for half the price of the one i was eyeing. 2 Quote Link to comment Share on other sites More sharing options...
Fistful of Energon Posted May 15, 2014 Author Share Posted May 15, 2014 I've run into a issue. I've been attempting to sort all the strap and Velcro strips into which part of the build they belong to. And according to the instructions I am to use 1.5" black elastic for all the arm and knee armor parts of which the kit included 73". But the cuts for those parts that the elastic will go through is just 1". A 18" piece of black elastic was included but not mentioned in instructions. To me it seems I should be using the 1" black elastic. Can anyone else tell me what's going on here? Lol Quote Link to comment Share on other sites More sharing options...
Bobik96 Posted May 15, 2014 Share Posted May 15, 2014 The knee requires a 1 inch and another .5 inch riveted on the top. 1" for the firearms as well The SC kit and instructions are great! Some of those details were outdated though. I had to buy more 1 inch elastic and a pair of suspenders from ebay for the upper arm elastic. The were .99 on ebay. Quote Link to comment Share on other sites More sharing options...
Fistful of Energon Posted May 15, 2014 Author Share Posted May 15, 2014 so I should have been given 73 inches of the one inch elastic rather than the 1.5 inch? Also, what did you need the suspenders for? Quote Link to comment Share on other sites More sharing options...
Bobik96 Posted May 15, 2014 Share Posted May 15, 2014 the suspenders were for lancer spec bicept elastic. Also the 2 inch elastic on the side has been changed to 45mm or 1.75 inches. 1 Quote Link to comment Share on other sites More sharing options...
Fistful of Energon Posted May 15, 2014 Author Share Posted May 15, 2014 How have I missed this? Thank you 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.