EnigmaEngine Posted November 17, 2013 Share Posted November 17, 2013 So, exactly that. The only issue I've noted with my brand new well loved kinda used scout bucket is that my speaking...and sometimes just exhaling....causes the interior of the lens to fog. I'm not hot....there seems to be plenty of ventilation as far as heat dispersal is concerned. But I was wondering if anyone else has encountered this, or knows of a fix. I've thought of just wiping the inside with the water-protection-antifog treatment I use for my car windshield, but sometimes those things smear a bit, and streaks on my lens seems a little silly to prevent fogging."I can't see! Ah, well, I'll use this....I can't see in an entirely different way! HA HA." Quote Link to comment Share on other sites More sharing options...
Chef Posted November 17, 2013 Share Posted November 17, 2013 with anti-fog (and this is going to be your best solution to your issue), apply it and leave it to dry. To stop it smearing, or remove the smears... when it's dry, use a very light polishing motion with a lint free cloth. You will get rid of the smears, but leave the anti-fog on. And with the heavy breathing, ever considered making dodgy phone calls late in the evening?? 4 Quote Link to comment Share on other sites More sharing options...
teabo Posted November 17, 2013 Share Posted November 17, 2013 you can use a non odor bar of soap.just rub against the lenses then wipe off the lenses ive been using that teqnique on my gm and td and i have no problem on fogging up Quote Link to comment Share on other sites More sharing options...
4505Marcel Posted November 17, 2013 Share Posted November 17, 2013 I use washing up liquid, put a bit on a piece of tissue. And rub it on the lense and buff off. Used this for years on my motor bikes also Quote Link to comment Share on other sites More sharing options...
Gaunt899 Posted November 17, 2013 Share Posted November 17, 2013 I avoided this by glueing only 4 parts of the visor,top,bottom,left and right.I left a small space between visor and faceplate so there cant be any fog,from outside this space in invisible. 1 Quote Link to comment Share on other sites More sharing options...
Donovan Posted November 18, 2013 Share Posted November 18, 2013 The only time my lens fogs is when its super cold outside would these solutions work for cold climates as wrll Quote Link to comment Share on other sites More sharing options...
EnigmaEngine Posted November 18, 2013 Author Share Posted November 18, 2013 You are all gentlemen. I'll give the wipes a try, and if that doesn't work, move on to the next thing. Quote Link to comment Share on other sites More sharing options...
Griffin-X Posted November 18, 2013 Share Posted November 18, 2013 I have used dish soap on mine, similar to what Marcel has mentioned. In the end, once I removed the mesh from the ears, that helped a ton. So...if you have mesh on the ears, yank that out! Quote Link to comment Share on other sites More sharing options...
EnigmaEngine Posted November 18, 2013 Author Share Posted November 18, 2013 There is mesh on the ears. I wonder who put that there. But I do wonder; if the mesh is removed, does the inside need to be painted black or something? 1 Quote Link to comment Share on other sites More sharing options...
Chef Posted November 19, 2013 Share Posted November 19, 2013 yup, it does. Quote Link to comment Share on other sites More sharing options...
Griffin-X Posted November 19, 2013 Share Posted November 19, 2013 There is mesh on the ears. I wonder who put that there. But I do wonder; if the mesh is removed, does the inside need to be painted black or something? The mesh is optional, and yep I did it! But, it can easily be removed. This is how I did my MLC3 lid: Quote Link to comment Share on other sites More sharing options...
EnigmaEngine Posted November 30, 2013 Author Share Posted November 30, 2013 Got some krylon, put painter's tape to seal the ear holes and cover the neck....and holy crap I still got paint spatter. The effect is there....no more mesh! But now I have black yuck around the helmet's ears that needs to be removed. The can says to use mineral spirits for removal, but I wanted to ask here and make sure this won't melt the plastic or anything. I love this helmet. I do not want to do it harm! Quote Link to comment Share on other sites More sharing options...
EnigmaEngine Posted December 3, 2013 Author Share Posted December 3, 2013 Googled it. Went ahead and did it. Helmet is messy on the inside, but once more pristine outside. Looks great. No mesh. 1 Quote Link to comment Share on other sites More sharing options...
Griffin-X Posted December 3, 2013 Share Posted December 3, 2013 Glad that worked out for ya! Quote Link to comment Share on other sites More sharing options...
Guest Forrest Patrol Posted September 25, 2015 Share Posted September 25, 2015 you can use a non odor bar of soap.just rub against the lenses then wipe off the lenses ive been using that teqnique on my gm and td and i have no problem on fogging up I use washing up liquid, put a bit on a piece of tissue. And rub it on the lense and buff off. Used this for years on my motor bikes also I have used dish soap on mine, similar to what Marcel has mentioned. In the end, once I removed the mesh from the ears, that helped a ton. So...if you have mesh on the ears, yank that out! How did you figure this out? Quote Link to comment Share on other sites More sharing options...
bikerscout73 Posted September 27, 2015 Share Posted September 27, 2015 Rain ex works awesome Quote Link to comment Share on other sites More sharing options...
rasman06 Posted September 27, 2015 Share Posted September 27, 2015 I put a fan in purposely pointing across my lens - solved it and a little air is nice! Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
4505Marcel Posted September 27, 2015 Share Posted September 27, 2015 I no longer have fans in my scout bucket, the washing up liquid is all that I have found is needed It's an old motorcycle trick, passed on to me Quote Link to comment Share on other sites More sharing options...
01Hawk Posted October 7, 2015 Share Posted October 7, 2015 My scout doesn't fog even in a wide variety of temps/humidities. I have the ears cut out and the lense is not 100% sealed leaving room for air to get in and out. Quote Link to comment Share on other sites More sharing options...
darthgarth Posted January 23, 2016 Share Posted January 23, 2016 You could always wipe it with spit and then rinse it. Oh wait that's for scuba. (Having said that it works for diving, just don't tell the kids when they want to try on the helmet) Quote Link to comment Share on other sites More sharing options...
indylead Posted February 5, 2016 Share Posted February 5, 2016 After several years with a motorcycle and wearing glasses I've tried and given up on all the 'put X on your lens' ideas - they may work for some people, but when you have three surfaces fogging up the coatings make it just as hard to see. Since any form of ventilation does work, I went this route and added a 3D printer fan in the snout that blows air up into the visor. I can also feel this on my face, and it keep my glasses clear as well. 9V switched battery holder wired directly to the fan. Both are velcroed in place for easy removal. Total cost if you get it all right first time isn't high, and I'll add a second just as soon as it gets warm enough to need something more. Quote Link to comment Share on other sites More sharing options...
Bubonos Posted February 5, 2016 Share Posted February 5, 2016 To prevent fogging, don't breath or sweat Quote Link to comment Share on other sites More sharing options...
Crex Posted September 27, 2016 Share Posted September 27, 2016 I know this thread is older. Just windering if the lens fogging got any better for you Enigma? I know a few TKs who pit in computer fans. I bought one for $10. Going to install it in mine when it comes in. Quote Link to comment Share on other sites More sharing options...
khazara Posted September 28, 2016 Share Posted September 28, 2016 I have no fogging of my lens but I'm not in a humid part of the country (So Cal). I use snorkel/scuba mask "no fog". Something like this: U.S. Divers Anti-Fog Gel https://www.amazon.com/dp/B00BUMEYKY/ref=cm_sw_r_cp_api_aKW6xbD3307C5 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.