Guest Jsweeney200 Posted October 9, 2012 Share Posted October 9, 2012 Hey folks Well I've finally managed to get some time free and become a bit more active around here for a change, moving on. I ordered my armour from studio creations about a week ago and already I can't wait for it to arrive. Also felt damn good to get that part ordered and enroute. I already have the flightsuit, gloves and biker pistol done so won't have to worry about that at all. My next item I'll be getting is my MLC lid which i've the money for and which I'll be ordering hopefully this week if not next week for sure. Then finally I'll be getting my cummerbund and boots in and around Christmas so I'm hoping to have it done for around february or march. So if you have any advice or info please let me know as I'm sure the more I know the better. Jonathan Quote Link to comment Share on other sites More sharing options...
4505Marcel Posted October 9, 2012 Share Posted October 9, 2012 Cool good to hear your parts are on the way, remember to ask lots of questions along the way. Oh and post pictures we like pictures Quote Link to comment Share on other sites More sharing options...
Guest Jsweeney200 Posted October 9, 2012 Share Posted October 9, 2012 I'll post pictures a little later on of what I have at the moment Quote Link to comment Share on other sites More sharing options...
Southscout Posted October 9, 2012 Share Posted October 9, 2012 If you're ordering the helmet from MC then be prepared for a longer waiting time. The estimated 10-12 weeks will probably be nowhere near the actual time it takes. I think I've read that some people order directly from MLC and then it's a lot quicker, but you need to get the snout and decals from somewhere else. So it's a matter of weighing the pros and cons, quality vs time basically. Quote Link to comment Share on other sites More sharing options...
Griffin-X Posted October 9, 2012 Share Posted October 9, 2012 Best of luck, good to see you moving forward! Quote Link to comment Share on other sites More sharing options...
Guest Jsweeney200 Posted October 20, 2012 Share Posted October 20, 2012 Will upload a pic today of items Quote Link to comment Share on other sites More sharing options...
Guest Jsweeney200 Posted October 20, 2012 Share Posted October 20, 2012 look what i got delighted Quote Link to comment Share on other sites More sharing options...
Guest Jsweeney200 Posted November 15, 2012 Share Posted November 15, 2012 Ordered the last of my items today (MLC lid, cummerbund,boots) started working on the armour, lots of sewing to be done. will post pictures soon Quote Link to comment Share on other sites More sharing options...
bwattsup Posted November 15, 2012 Share Posted November 15, 2012 Have a blast building Jonathan! I can't wait to have my big box party. Quote Link to comment Share on other sites More sharing options...
Guest Jsweeney200 Posted November 18, 2012 Share Posted November 18, 2012 so the time has come i've got all my armour out of the box, sanded down all the parts to round of the sharp edges and i've sewed the elastic and velcro together and followed the instructions. (Close up of armour) and here is a picture of my flight suit on a mannequin. other news: I've ordered my lid from MLC and i'm just in the process or ordering decals, lense and snout piece from Moncal. i've my blaster almost painted too which will make a great addition to the suit. Ordering my cummerbund and boots tommorow so alls good. i'm hoping to receive all parts before christmas so i avoid the christmas/new year post rush. so thats my recent work and looking forward to my next update. As usual any comments or anything please feel free to post Jonathan Quote Link to comment Share on other sites More sharing options...
Guest Jsweeney200 Posted November 20, 2012 Share Posted November 20, 2012 Update; Good news- ordered my cummerbund and boots and I'll have them before Christmas "yayyyyy" Bad news- now I have to get decals, a lense and a snout piece which is gonna cost me $40 to get. "awhhh" Quote Link to comment Share on other sites More sharing options...
bwattsup Posted November 20, 2012 Share Posted November 20, 2012 Update; Good news- ordered my cummerbund and boots and I'll have them before Christmas "yayyyyy" Bad news- now I have to get decals, a lense and a snout piece which is gonna cost me $40 to get. "awhhh" Not a bad dilemma to be in. That's 5 pieces closer to completion. Quote Link to comment Share on other sites More sharing options...
Guest Jsweeney200 Posted December 18, 2012 Share Posted December 18, 2012 lads need some help with the knee armour. do you put the elastic through the hole in the knee or do you ignore it? it's on a couple of the parts. http://www.google.ie/imgres?q=biker+scout+knee+armour&um=1&hl=en&sa=N&tbo=d&biw=1366&bih=650&tbm=isch&tbnid=FttFY8Q2VijApM:&imgrefurl=http://www.studiocreations.com/howto/bikerscout/bscout_assembly.html&docid=m1ZMwRRGcFOygM&imgurl=http://www.studiocreations.com/howto/bikerscout/images/assem_knees.jpg&w=640&h=480&ei=8NPQUPvoBNK4hAeT-YGgBA&zoom=1&iact=hc&vpx=188&vpy=271&dur=83&hovh=194&hovw=259&tx=145&ty=89&sig=105443628850941298616&page=1&tbnh=145&tbnw=201&start=0&ndsp=24&ved=1t:429,r:17,s:0,i:136 see the sides of the knee armour? there is a hole like a line. does the strap go through it and around or what? very confused Quote Link to comment Share on other sites More sharing options...
4505Marcel Posted December 18, 2012 Share Posted December 18, 2012 Yes through the hole mate, go around the outside and then into the hole. Have a bit of velcro stuck in the sides of the knee armour and a corresponding tab on the elastic. I also have a piece of velcro in the flat of the knee and a piece on my flight suit to stop it moving job done. This is basically the same for all the armour parts except for the shoulders, I still have the leastic and velcro, just no slots for it to go through Quote Link to comment Share on other sites More sharing options...
Guest Jsweeney200 Posted December 18, 2012 Share Posted December 18, 2012 Because the elastic will not stretch anymore and I'm afraid if breKing the knee armour MOD edit, please do not swear on the forum thank you Quote Link to comment Share on other sites More sharing options...
4505Marcel Posted December 19, 2012 Share Posted December 19, 2012 Buy some new elastic its only a few pence bro, best to do it right Quote Link to comment Share on other sites More sharing options...
Southscout Posted December 19, 2012 Share Posted December 19, 2012 Here's how I did it. No velcro, just two loops on the end which I hand-stitched. The velcro on the inside is really what's keeping it up so there's no need to tighten it too much. I stretched it as much as I could, then fastened it with a pin, and then sewed it together. Quote Link to comment Share on other sites More sharing options...
Guest Jsweeney200 Posted February 8, 2013 Share Posted February 8, 2013 well it's been a while since i updated this thread so here is where i am. i've got the blaster finished, boots finished, have my cummerbund,helmet done. Tommorow the plan is to start into the chest armour and belt. i've previously sewed all the parts for the various pieces ie (knees,elbows, etc) but they won't stretch anymore and i'm afraid they'll break so i may just need to re-sew and start from scratch. thats where i am so far. more pics will be posted when i progress Quote Link to comment Share on other sites More sharing options...
4505Marcel Posted February 9, 2013 Share Posted February 9, 2013 Its comming on mate, good to see your progress Quote Link to comment Share on other sites More sharing options...
Guest Jsweeney200 Posted February 10, 2013 Share Posted February 10, 2013 WELL HEY GUYS........... i didn't expect to be here again so soon but i really ploughed through loads today between my biker scout and my predator suit. so today i got the chance to re-sew all the bits such as the knees etc and tommorow i plan to re-sew the shoulder bells because i know they're not tight enough. overall i felt like i did a fair bit. so here is the pics of where i am at for the moment and the pics were taken today (first time i wore most of the suit) so yeah, i'll check in again sometime during the middle of the week for pics of armour and next week hopefully in regards to everything else Jonathan Quote Link to comment Share on other sites More sharing options...
Southscout Posted February 11, 2013 Share Posted February 11, 2013 Great progress! You'll want to move out your pouches though, put them at the edges of the ribbing on the bund. You seem to have plenty of space there. Quote Link to comment Share on other sites More sharing options...
Guest Jsweeney200 Posted February 11, 2013 Share Posted February 11, 2013 yeah i know mate, was told by another scout on here who's helping me build my suit that they're too close Quote Link to comment Share on other sites More sharing options...
Guest Jsweeney200 Posted February 14, 2013 Share Posted February 14, 2013 i moved the pouches more to the sides. When can i ask for clearance for pathfinder? is it when i have the whole costume finished yeah? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.