Safetymanual

Yup, that those covered as well. I just broke down and bought a second belt for this. I'll have another set of pouches too.

Actually that's very do-able if I use velcro. I'll just need to widen the slits on the armor just a touch. Thanks for the idea!

Anyone try to swap out their side straps? I'm currently running an off-white setup but I want to have an all white setup too, because....why not? I thought I could just add some buttons to the ends of the strapping but I then realized that there's a slit that the strap goes through. I thought I could cut the small piece of armor the strap covers but I really don't want to do that. I could also widen the slit too but I want to bounce ideas off you all first.

Thanks! Ah ok. That'll be easy enough to fix. I have to get a sewing machine or wait for a build day to sew the straps onto the belt. Build day might be better so I can get more eyes on everything before it gets sewn.

I believe I have my armor all done except for the shoulder bells. I'm waiting on my Flight suit and vest to come in before I know if I need to trim them down or not. I am also waiting on my boots. I learned that riveting is not hard at all. Removing rivets is also easy. Pretty sure my belt is good. I just need to trim some fabric off but I'll wait until I can 100% say it's good. My cummerbund is too tall because I measured wrong. It's currently at the seamstress to have it corrected.

For the chest\back side straps, those can be off-white correct? I believe I'm reading the CRL correctly. Under the belt section: If using off-white cummerbund pouches and side straps, the drop box straps are also off-white.

Thanks for the feedback. Bund height is right at 14" Belt should be no problem to move lower. Edit: Looks like I took my measurements wrong. Bund needs to be right at 9". Shouldn't be a problem for me to reach out to a tailor to get it fixed.

Did a little bit of assembly this evening. First time riveting for me! I suck at wrapping the cummerbund by myself. Feels like I'm pulling my shoulder out of joint doing it. Back of the belt is crooked. My daughter did her best attaching it to me.

I watched the armor video that @BikerScout007 made. Made a huge difference in my confidence to put this together. It was like an armor for dummies video. That being said, I did some strapping while I get a sewing machine. I'm not a big guy and I'm thinking the arm armor might be a bit big. Do I need to trim down everything or should I be able to get by with shrinking the shoulder bell?

Holy moly! It's been a while since I've updated. I have everything either ordered or on hand now. Only waiting on my flight suit, vest and boots. I still have to assemble the armor. New bucket from @Darth Voorhees from 7CS came in and it's fantastic! He also provided my cummerbund, pouches and cod piece. Shameless plug for this hardworking trooper. Lovely pic of my being all excited. Can't you see it in my face?

Now that the weather has warmed up and isn't dropping to freezing or below I can work outside. I've finished sanding down by helmet and it's almost ready for painting. I found that I have a few cracks. Can I get recommendations on how to fix these? I am concerned about the jacked up ear hole. I'm thinking that I should just cut the broken and cracked section off.

Helm is coming along. Learning a lot fixing the problems on it. I'm going to start sanding the current paint job off so I can prime and repaint. I've ordered new decals. I believe I've finished painting the greeblies for the varying parts. They need to be flat black correct?

Unfortunately yes, the painters tape just pulled the paint right off. I think I'm at a point that I can start correcting the paint and then mount the visor back on.

I'm made some progress on my attempt to fix the helm. I got some better visor bolts and installed them. How are the ear holes looking? Passable? https://i.imgur.com/kLfq3xM.jpg https://i.imgur.com/CMOMlRR.jpg https://imgur.com/yfQMF7X https://imgur.com/tcU10hY One side of the visor piece isn't quite flush. Is that going to be a problem? https://imgur.com/kYdG9qu https://imgur.com/R3fjoNR I've also started priming the greeblies for my armor. https://imgur.com/orpPxWQ

That's for telling me about the link. It's fixed now. I'm going for basic. Maybe one day I'll go for Lancer. I'm unsure of my weathering at the moment, I just know it's going to get done. The gap I was talking about is the area to the right of where the visor bolt is. The spot where the visor and helmet meet.

Update time. Boots\cummerbund\pouches\cod have been ordered. Helmet and blaster came in. Helmet seems to need a little work. Looking for feedback before I start trying to work on this. Bought this from Chris the Prop Guy. Got this on his Etsy page at the same time he was doing a run on the forums here. Either the snout greeblie and visor bolts didn't get installed or customs screwed with it. There are some light damage so I think customs had a hand in it. Front: https://imgur.com/W2uk7Hs Front visor: https://imgur.com/NRccSM8 I'm assuming in here will need to be white. Might be able to not do anything due to weathering. Left side: https://imgur.com/8qJRERC Left ear: https://imgur.com/Xx7cvFU This is nowhere near as smooth or neat as it could be. The sanding tool on my Dremel should fix this. Left side with bolt: https://imgur.com/BhTkb0u Not sure if the visor bolt is big enough. I taped it on for the pic. I'm also concerned about the top gap of the visor. Looks like it's off. Back: https://imgur.com/yoFNTjU Under my pinky is some physical damage. Not too worried since it's on the bottom underside. Right side: https://imgur.com/VBntL6A Inside: https://imgur.com/jGSQYmT The visor is held on with some foam. Some hot glue in spots should fix this. That way I can have it more secure than what it is. Blaster!: https://imgur.com/Pzsl3FC https://imgur.com/WFGXxjz

Thanks for the info all. I will reach out for assistance, don't worry about that. I find myself frequently amazed on how helpful and willing Legion members are.

Got a buddy in the garrison who’s going to help me out with getting the armor built. Probably best to wait until the soft parts are in before I do this right?

Yeah it's trimmed up nice, just didn't know if I will have to make anything smaller. I opted for the pretrimmed set since I don't have the tools\skillset\confidence to do it myself. I'll get there eventually. Since I like to hang around the forums before doing anything I think I got a decent vendor list. Chrisx909x is making my boots. I'm going to be reaching out to KriptonTop for the soft parts.

MolCal armor showed up yesterday! I get to learn how to assemble all this now. I don't think I'll need to trim anything but I'll bring it up and get advice before I do anything. I also welcome any advice. My helmet is still being made as well as my EC-17 blaster. Ordered my boots this morning. Soft pieces will be ordered after the wife and I get a couple of things paid off, so probably next month. I'll get my gloves sometime eventually. I was most worried about the chest and back piece but since I'm short and stocky both fit like a glove. Based on the CRL picture having the other parts a little bit big on my doesn't seem like a problem. I don't think it will be bad at all for my body size...or lack thereof. One of the guys in the garrison reassured me that the scout is a very forgiving setup. I'm looking forward to joining the Pathfinders soon.