jadloc

he doesn't deliver to my country 😥

Hi scouts. I need help for my punch-bag. I have the bag, I have the rank bar, but impossible to find a belt in Europe. The only one available is that of Dreadmaster, but the shipping costs exceed $ 50. Would it be possible, one of you will order it and send it to me at the correct price, of course I will pay everything Thanks for your help

Hi brothers, the latest advances on the blaster. lay several layers of matte black. Next step, the weathering with tips in friends, warhammer figurine specialist. I used the painting: Citadel - Bolt Gun Metal. Only the layer of varnish remains, to protect all this. And after, go for troop

I confess that I know absolutely nothing about it. He is a friend who is used to 3D printing, who advise me the products.

Hi brothers Here is the construction of my Dlt-20 from 3DPRINTINGFORGE https://www.etsy.com/fr/listing/682496366/star-wars-dlt-20-a-dlt-20-a-dlt-20?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=dlt-20&ref=sr_gallery-1-4&organic_search_click=1&pro=1 I ordered it as a kit. Regarding delivery, timely and well packaged. Unpacking: first opinion, it looks very big. some parts still require cleaning the excess material. The assembly Parts are difficult to assemble, hole too small and tip too big. But after a large sanding, the parts fit perfectly with a slight tightening (which is good). Everything is glued to the epoxy glue. Between some elements, an opening was visible. I filled the hole with a putty paste. For more safety, I drill a hole along the length of the weapon to introduce an aluminum bar, fix with putty paste. Painting: Here I used an aerosol filler joint. A layer, a sanding, a layer, a sanding, again and again. Except for the barrel, where I left the printing marks, to keep a machining effect. I started to put layers of matte black. I still have a few layers of black, and do all the weathering. The following will come

mine has just arrived. at first glance, it looks ok. The only thing that scares me is the handle, it looks too big. Do you have opinions? a topic will follow bisous, tendresse et chocolat 😜

I had already done this research rather. Here's what I found: On Etsy: AprilStormProps Just Files DIY https://www.etsy.com/fr/listing/652211213/blastech-dlt-20-a-laser-fusil-blaster-de?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=dlt-20&ref=sr_gallery-1-3&organic_search_click=1 Or ready to paint https://www.etsy.com/fr/listing/644085004/diy-blastech-dlt-20-a-laser-fusil?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=dlt-20&ref=sr_gallery-1-2&organic_search_click=1 There are 3DPRINTINGFORGE https://www.etsy.com/fr/listing/682496366/star-wars-dlt-20-a-dlt-20-a-dlt-20?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=dlt-20&ref=sr_gallery-1-4&organic_search_click=1&pro=1 I ordered it, it should arrive next week. I will try to make a topic on construction. other: https://www.imperialarms3d.com/product-page/star-wars-custom-reinforced-blastech-dlt-20a-long-barreled-blaster-rifle there are still some, but I can not find their names ...

Thank you my brothers in arms, @Shortstack , There she is: Happy independence day for all from Belgium 🌭🍻✨

A Sunday that starts well. Really happy to enter in the very close circle of the Lancer. Thank you for your advice, and thanks to @Chopper for his explanations.

Helmet -The close up detail of the MLC helmet shows that the upper snout detail is painted grey with vent holes cut into the plastic. For level 2, the grey and black detail should use a decal, with no holes, as per the film helmets. Flight Suit -The leg elastic on your flight suit is quite tight. You should loosen it slightly. -You will need to add a collar closure to your flight suit -Your back flap appears to be too narrow. Ideally, it should extend approximately 1.5" (38mm) further on each side for proper fitment Shoulder Armor, Chest Armor, Back Armor -Your back armor is pulling your chest armor up, which is then pulling back your shoulder bells. You should look at affixing your chest armor onto your front, so it doesn't slide back. Also, you might need to trim a very small amount of the back armor shoulder bridge, so everything aligns and sits properly. -Your should bridge covers appear to be 1.5" (40mm), they should be between 0.5" (12mm) and 1" (25mm) wide as per the CRL. -Your side straps appear to use 1.5" (40mm) cotton twill tape. As per the CRL, they should be white cotton webbing. Upper Arm Armor -Bicep armor strapping appears to be 35mm. As per the CRL, it should be 50mm. Forearm Armor and Gloves -When you re-take your photos, please reposition your forearm armor lower, so they overlap the gloves. Cummerbund -Please move your pouches outwards, so they sit approximately 1 inch from the outermost cummerbund rib on each side. modifications made: Belt and Detonator -Your detonator tubing appears to be silver. It should be medium to light grey. -Can you please provide detail shots on the drop box webbing? From your overalls shots it looks like the same twill tape that was used for the side webbing? If so, the strapping there should also be 1.5 inches (38mm) wide and made of white cotton webbing. Knee Armor -The rivets securing the upper elastic strap are painted white. As per the CRL, the rivets should be silver in color. here we go again 🤞🤞

thank you chopper for your feedback. I will work on the corrections I understand. and I come back to you for more details for others, because my English is very bad.

TB-83107 FanWars Garrison helmet - SC armor - SC all soft parts - 4505Marclel boots - gloves - blaster pistol - I don't know, all the costume comes from 4505Marcel. I hope I do not forget anything Games are made, ...

good ride, for your last travel. RIP bucket off

Order passed to my friend printer, more than wait for the kit. 🤩🤩 I'll let you know about the progress 😉

Thanks for your help. I'm still looking for... Ajay, where did you find the file for the 3D printer?