Heatshock Posted March 26, 2012 Share Posted March 26, 2012 this is where we are as of Mar 2012 MUST HAVE * Comply with ALL CRL - BASE Must Have Requirements * NO part of the Kashyyyk (Scout) Trooper uses any part of the Biker Scout costume. Biker Scout parts are NOT ACCEPTABLE for use on the Kashyyyk Trooper. * Weathering is encouraged, layered or topical. PAINT RECOMMENDATIONS - HARD ARMOUR * Chrome undercoat or applied topically * Krylon khaki tan for the base color/custom mix available - check with armourers for samples * Polly scale, Panzer Olive green F505113/Humbrol no 78 * Tamiya Color, Flat Earth (brown) FX-52 item # 81359 * black/grey/white misting as appropriate ARMOUR * Chest plate - 2 black straps connecting chest and back plates. - overlap of back plate on the chest plate at the side join * Back plate with tank. - Tank and back plate must be one piece - Tank must have top greeblie[/indent]- tank top greeblie is BLACK * 2 shoulder bells * 2 bicep pieces - left bicep armor must have grey strap and specific greeb - all painted grey - right bicep armor must have greeblies painted grey * 2 forearm pieces with 2 straps for each piece of armor. * Cod piece. - triangular in shape - covered in cloth and painted in camo pattern * 2 pieces of knee armour - specific black/dark grey straps for each piece of knee armour. * 2 complete shin armor pieces that are seamless. - 2 khaki or white belts on each shin - Black buckle and a smaller clip on each belt. * 2 pieces of boot armor - 4 black rings , 2 for each boot. - 1/2 inch "O" ring HELMET * Fan-made helmet * visor with reflective green lens * full set of greeblies - 2 breathers, triangle piece, five bar snout piece and visor bolts * rectangular slot on the visor measuring 2.5 to 2.75 inches long and 0.75 inches wide - centred in the middle of the visor * note on paint - the INSIDE of the visor is painted the same base colour as the armour NOT black WEAPON * DC-15 long or short rifle. SOFT GOODS * Jacket and pants or jumpsuit with the correct (or as close as possible camo.) Can be dyed DMP (british) desert camo. Dye them brown and black to get them close. * Balaclava to wear underneath helmet - Leg pouches measuring 7 inches by 5 inches with a biased cut flap on the outside - placed iin the correct position - Grey riding patch on inner thigh * Cummerbund. No molle vest or variant. - dark grey base, with lighter grey vertical straps - Midsection belt that goes around the cummerbund. - 2 vertical black stripes to go on cummerbund belt on the front - 16 pouches of accepted size. Use dave's measurements thread as a guide. + 2 long front pouches + 2 small rectangle front pouches + 8 small side pouches + 2 long back pouches. + 2 large rectangle back pouches. - pouches are either cloth covered and painted with camo pattern or covered with multi-cam cloth * belt and buckle - grey with black insets - buckle - dark grey/gunmetal grey * 2 drop boxes with 4 straps hung from belt and belt buckle - are either cloth covered and painted with camo pattern or covered with multi-cam cloth * gauntlet-style gloves - black leather to the wrists and brown gauntlet sections - 2 grey pads on top of each glove - 2 rubber greebliess on brown leather gauntlet part of the glove - grey coloured - grey belt with buckle around the wrist FOOTWEAR * Boots. - White with khaki or tan soles. - Soles need a curved shape in between the heel and sole similar to Jango Fett boot soles Link to comment Share on other sites More sharing options...
Recommended Posts